EasyManuals Logo

Huawei iMaster NetEco V600R021C10 User Manual

Huawei iMaster NetEco V600R021C10
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
Item Specications
DO expansion
(RJ45)
Output voltage: 13–15 V DC (rated voltage: 14.5 V DC)
Supports one active DO port.
The power supply can be switched on or o and is on by
default.
Fault isolation There are three groups of 12 V ports. A group has a maximum
current of 660 mA, a route has a maximum current of 800 mA,
and the maximum total current is 2 A.
Group 1: AIDI_1 and DO/12V ports
Group 2: AIDI_2, COM1/AIDI_4, and COM3/12V ports
Group 3: AIDI_3 and COM2/AIDI_5 ports
Wireless
communicatio
n
Supports wireless communication that complies with
IEEE802.15.4.
4G Supports the 4G module, SMS sending, and 3G communication,
and provides a standard SIM card slot.
1. China: 2G and 4G networks support China Unicom or China
Mobile SIM cards, and 3G networks support only China
Unicom SIM cards.
2. Outside China: Select SIM cards according to the following
wireless modes and frequency bands:
4G: LTE-FDD, covering frequency bands B1, B3, B5, B7, B8
and B20; LTE-TDD, covering frequency bands B38, B40,
and B41
3G: WCDMA, covering frequency bands B1, B5, and B8
2G: GSM, covering frequency bands 900 MHz/1800 MHz
NOTE
The prerequisite for using a SIM card is that the site has signal
coverage.
Due to the performance limitation of the wireless module, China
Telecom SIM cards are not supported.
USB Supports USB 2.0 and 5 V, 1 A power supply.
After installing the WiFi module, connect the WiFi module
to the ECC800-Pro using the app on the mobile phone or
pad to view the basic information about the smart module,
such as layout, resources, energy eciency, environment,
and alarms.
You can insert a USB
ash drive to export historical data
and conguration les and import conguration les.
SW button Restores the default IP address, factory settings, and user
information.
Supports RF_Z (802.15.4) networking.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 4 Connecting Monitoring Cables to Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 95

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei iMaster NetEco V600R021C10 and is the answer not in the manual?

Huawei iMaster NetEco V600R021C10 Specifications

General IconGeneral
BrandHuawei
ModeliMaster NetEco V600R021C10
CategoryNetwork Hardware
LanguageEnglish

Related product manuals