Figure 7-25 Removing an access controller
Step 3 Unpack and take out the new access controller.
Step 4 Unlock the access controller with the delivered key.
Figure 7-26 Unlocking an access controller
Step 5 Install the new access controller by performing the operations prior to Step 3 in
reverse order.
Step 6 Reinstall the removed cables for the access controller according to the labels and
start the access controller.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 7 Device Maintenance
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 306
To Next Page
Loading...
