Huawei Quidway S9300

6.33.4 Sending Trap Messages When Probes Are Complete......................................................................6-127
6.33.5 Sending Trap Messages When the Transmission Delay Exceeds Thresholds.................................6-127
6.33.6 Checking the Configuration.............................................................................................................6-128
6.34 Configuring Test Results to Be Sent to the FTP Server............................................................................6-129
6.34.1 Establishing the Configuration Task................................................................................................6-129
6.34.2 Configuring Parameters for Connecting the FTP Server.................................................................6-130
6.34.3 Enabling the Function of Saving NQA Test Results Through FTP.................................................6-131
6.34.4 (Optional) Configuring the Number of Test Results Saved Through FTP......................................6-131
6.34.5 (Optional) Configuring the Duration of Saving Test Results Through FTP....................................6-132
6.34.6 (Optional) Enabling Alarms to Be Sent to the NM Station After the FTP Transmission Succeeds
.....................................................................................................................................................................6-132
6.34.7 Starting the Test Instance.................................................................................................................6-132
6.34.8 Checking the Configuration.............................................................................................................6-133
6.35 Configuring a Threshold for the NQA Alarm...........................................................................................6-134
6.35.1 Establishing the Configuration Task................................................................................................6-134
6.35.2 Configuring the Event Corresponding to the Alarm Threshold.......................................................6-135
6.35.3 Configuring the Alarm Threshold....................................................................................................6-135
6.35.4 Starting the Test Instance.................................................................................................................6-136
6.35.5 Checking the Configuration.............................................................................................................6-137
6.36 Maintaining NQA......................................................................................................................................6-137
6.36.1 Restarting NQA Test Instances........................................................................................................6-138
6.36.2 Clearing NQA Statistics...................................................................................................................6-138
6.36.3 Debugging NQA..............................................................................................................................6-139
6.37 Configuration Examples............................................................................................................................6-139
6.37.1 Example for Configuring the ICMP Test.........................................................................................6-141
6.37.2 Example for Configuring the FTP Download Test..........................................................................6-143
6.37.3 Example for Configuring the FTP Upload Test...............................................................................6-145
6.37.4 Example for Configuring the HTTP Test.........................................................................................6-147
6.37.5 Example for Configuring the DNS Test...........................................................................................6-149
6.37.6 Example for Configuring the Traceroute Test.................................................................................6-151
6.37.7 Example for Configuring the SNMP Query Test.............................................................................6-153
6.37.8 Example for Configuring the TCP Test...........................................................................................6-155
6.37.9 Example for Configuring the UDP Test...........................................................................................6-157
6.37.10 Example for Configuring the Jitter Test.........................................................................................6-160
6.37.11 Example for Configuring the MAC Ping Test...............................................................................6-162
6.37.12 Example for Configuring the LSP Ping Test for a Common Tunnel.............................................6-165
6.37.13 Example for Configuring the LSP Jitter Test for a Common Tunnel............................................6-168
6.37.14 Example for Configuring the LSP Jitter Test for the MPLS TE Tunnel........................................6-171
6.37.15 Example for Configuring the LSP Traceroute Test for the TE Tunnel..........................................6-175
6.37.16 Example for Configuring an ICMP Jitter Test...............................................................................6-179
6.37.17 Example for Configuring a Path Jitter Test....................................................................................6-181
6.37.18 Example for Checking the RPF Path from the Source to the switch Through the MTrace Test...6-183
Contents
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
xvi Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)