Huawei Quidway S9300

6.37.19 Example for Checking the Multicast Path from the Source to the switch Through the MTrace Test
.....................................................................................................................................................................6-189
6.37.20 Example for Checking the RPF Path from the Source to Destination Host Through the MTrace Test
.....................................................................................................................................................................6-194
6.37.21 Example for Checking the Multicast Path from the Source to Destination Host Through the MTrace
Test..............................................................................................................................................................6-199
6.37.22 Example for Configuring the PWE3 Ping Test on a Single-Hop PW............................................6-205
6.37.23 Example for Configuring the PWE3 Ping Test on a Multi-Hop PW.............................................6-209
6.37.24 Example for Configuring the PWE3 Trace Test on a Single-Hop PW..........................................6-214
6.37.25 Example for Configuring the PWE3 Trace Test on a Multi-Hop PW...........................................6-219
6.37.26 Example for Configuring an NQA Test Group..............................................................................6-225
6.37.27 Example for Configuring the Test of Sending NQA Threshold Traps to the NMS.......................6-228
6.37.28 Example for Configuring Test Results to Be Sent to the FTP Server............................................6-232
6.37.29 Example for Configuring a Threshold for the NQA Alarm...........................................................6-235
6.37.30 Example for Configuring NQA Upper/Lower Alarm Threshold and Test Instance Linkage........6-238
7 NetStream Configuration.........................................................................................................7-1
7.1 Overview of NetStream...................................................................................................................................7-3
7.2 NetStream Features Supported by the S9300..................................................................................................7-4
7.3 Collecting IPv4 Traffic Statistics....................................................................................................................7-5
7.3.1 Establishing the Configuration Task......................................................................................................7-5
7.3.2 Configuring the NetStream Function on an Interface............................................................................7-6
7.3.3 (Optional) Configuring the Version of Exported Packets......................................................................7-6
7.3.4 Setting the Destination Address of Statistics.........................................................................................7-7
7.3.5 (Optional) Aging the TCP Traffic According to Its FIN Flag...............................................................7-7
7.3.6 (Optional) Configuring the Inactive Aging Time of the Original Traffic..............................................7-8
7.3.7 Checking the Configuration...................................................................................................................7-8
7.4 Collecting IPv6 Traffic Statistics....................................................................................................................7-8
7.4.1 Establishing the Configuration Task......................................................................................................7-9
7.4.2 Configuring the NetStream Function on an Interface............................................................................7-9
7.4.3 (Optional) Configuring the Format of Exported Packets.....................................................................7-10
7.4.4 Setting the Destination Address of Statistics.......................................................................................7-10
7.4.5 (Optional) Aging the TCP Traffic According to Its FIN Flag.............................................................7-11
7.4.6 (Optional) Configuring the Inactive Aging Time of the Original Traffic............................................7-12
7.4.7 Checking the Configuration.................................................................................................................7-12
7.5 Configuring the Aggregation Statistics About IPv4 Traffic.........................................................................7-12
7.5.1 Establishing the Configuration Task....................................................................................................7-13
7.5.2 Configuring the NetStream Function on an Interface..........................................................................7-13
7.5.3 (Optional) Configuring the Version of Exported Packets....................................................................7-14
7.5.4 (Optional) Configuring the Export of Statistics...................................................................................7-14
7.5.5 Configuring the Aggregation Function................................................................................................7-15
7.5.6 Checking the Configuration.................................................................................................................7-15
7.6 Configuring the Flexible NetStream Feature................................................................................................7-16
7.6.1 Establishing the Configuration Task....................................................................................................7-16
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management Contents
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
xvii