Huawei Quidway S9300

LLDP Notification Enable :enabled (default is disabled)
Management Address :IP: 10.10.10.1
Remote Table Statistics:
Remote Table Last Change Time :0 days, 0 hours, 0 minutes, 0 seconds
Remote Neighbors Added :1
Remote Neighbors Deleted :0
Remote Neighbors Dropped :0
Remote Neighbors Aged :0
Total Neighbors :1
Port information:
Interface GigabitEthernet1/0/1:
LLDP Enable Status :enabled (default is disabled)
Total Neighbors :1
Port ID subtype :interfaceName
Port ID :GigabitEthernet1/0/1
Port description :HUAWEI, Quidway Series, GigabitEthernet1/0/1 Interface
Port And Protocol vlan ID(PPVID) don't supported
Port VLAN ID(PVID) :1
VLAN Name of VLAN 1: vlan1
Protocol identity :STP RSTP/MSTP LACP EthOAM CFM
Auto-negotiation supported :Yes
Auto-negotiation enabled :Yes
OperMau :speed(1000)/duplex(Full)
Power port class :PD
PSE power supported :No
PSE power enabled :No
PSE pairs control ability:No
Power pairs :Unknown
Port power classification:Unknown
Link aggregation supported:No
Link aggregation enabled :No
Aggregation port ID :0
Maximum frame Size :1526
MED port information
Media policy type :Unknown
Unknown Policy :Yes
VLAN tagged :No
Media policy VlanID :0
Media policy L2 priority :0
Media policy Dscp :0
Power Type :Unknown
PoE PSE power source :Unknown
Port PSE Priority :Unknown
Port Available power value:0
# View the neighbor information of Switch A.
<SwitchA> display lldp neighbor interface gigabitethernet 1/0/1
GigabitEthernet1/0/1 has 1 neighbors:
Neighbor index : 1
Chassis type :macAddress
4 LLDP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
4-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)