Huawei Quidway S9300

port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
return
l Configuration file of PE-A
#
sysname PE-A
#
mpls lsr-id 192.2.2.2
mpls
#
mpls l2vpn
#
mpls ldp
#
mpls ldp remote-peer 192.3.3.3
remote-ip 192.3.3.3
#
vlan batch 110 120
#
interface Vlanif110
mpls l2vc 192.3.3.3 100
#
interface Vlanif120
ip address 10.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 120
port hybrid untagged vlan 120
#
#
interface LoopBack0
ip address 192.2.2.2 0.0.0.0
#
nqa test-instance test pwe3ping
test-type pwe3ping
local-pw-id 100
local-pw-type vlan
remote-pw-id 100
#
ospf 1
area 0.0.0.0
network 192.2.2.2 0.0.0.0
network 10.1.1.0 0.0.0.255
#
return
l Configuration file of P
#
sysname P
#
mpls lsr-id 192.4.4.4
mpls
#
mpls ldp
#
vlan batch 120 130
#
interface Vlanif120
ip address 10.1.1.2 255.255.255.0
mpls
mpls ldp
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-207