Huawei Quidway S9300

<SwitchA> display nqa alarm
NQA Alarm Information:
---------------------------------------------------------------------------
Admin-Name Operation-Tag Alarm-Entry AlarmType Event-Entry
---------------------------------------------------------------------------
admin icmpjitter 10 Rising 10
admin icmpjitter 10 Falling 10
# Check the status of the NQA client.
<SwitchA> display nqa-agent
NQA Tests Max:2000 NQA Tests Number: 2
NQA Flow Max:1000 NQA Flow Remained:1000
nqa test-instance admin icmp
test-type icmp
destination-address ipv4 11.1.1.2
nqa status : normal
nqa test-instance admin icmpjitter
test-type icmpjitter
destination-address ipv4 11.1.1.2
alarm 10 lost-packet-ratio absolute rising-threshold 80 10 falling-threshold 10
10
nqa status : normal
# Check the NQA test result.
<SwitchA> display nqa results
NQA entry(admin, icmp) :testflag is inactive ,testtype is icmp
1 . Test 1 result The test is finished
Send operation times: 3 Receive response times: 0
Completion:failed RTD OverThresholds number: 0
Attempts number:1 Drop operation number:0
Disconnect operation number:0 Operation timeout number:3
System busy operation number:0 Connection fail number:0
Operation sequence errors number:0 RTT Stats errors number:0
Destination ip address:11.1.1.2
Min/Max/Average Completion Time: 0/0/0
Sum/Square-Sum Completion Time: 0/0
Last Good Probe Time: 0-0-0 0:0:0.0
Lost packet ratio: 100 %
NQA entry(admin, icmpjitter) :testflag is inactive ,testtype is icmpjitter
1 . Test 1 result The test is finished
SendProbe:60 ResponseProbe:0
Completion:failed RTD OverThresholds number:0
OWD OverThresholds SD number:0 OWD OverThresholds DS number:0
Min/Max/Avg/Sum RTT:0/0/0/0 RTT Square Sum:0
NumOfRTT:0 Drop operation number:60
Operation sequence errors number:0 RTT Stats errors number:0
System busy operation number:0 Operation timeout number:0
Min Positive SD:0 Min Positive DS:0
Max Positive SD:0 Max Positive DS:0
Positive SD Number:0 Positive DS Number:0
Positive SD Sum:0 Positive DS Sum:0
Positive SD Square Sum:0 Positive DS Square Sum:0
Min Negative SD:0 Min Negative DS:0
Max Negative SD:0 Max Negative DS:0
Negative SD Number:0 Negative DS Number:0
Negative SD Sum:0 Negative DS Sum:0
Negative SD Square Sum:0 Negative DS Square Sum:0
Min Delay SD:0 Min Delay DS:0
Max Delay SD:0 Max Delay DS:0
Delay SD Square Sum:0 Delay DS Square Sum:0
Packet Loss SD:0 Packet Loss DS:0
Packet Loss Unknown:0 Average of Jitter:0
Average of Jitter SD:0 Average of Jitter DS:0
jitter out value:0.0000000 jitter in value:0.0000000
NumberOfOWD:0 Packet Loss Ratio: 100%
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-240 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)