Huawei Quidway S9300

OWD SD Sum:0 OWD DS Sum:0
ICPIF value: 0 MOS-CQ value: 0
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
vlan batch 10
#
interface Vlanif10
ip address 11.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
nqa test-instance admin icmp
test-type icmp
destination-address ipv4 11.1.1.2
nqa test-instance admin icmpjitter
test-type icmpjitter
destination-address ipv4 11.1.1.2
nqa event 10 linkage admin icmp
nqa test-instance admin icmpjitter
alarm 10 lost-packet-ratio absolute rising-threshold 80 10 falling-threshold
10 10
#
return
l Configuration file of Switch B
#
sysname SwitchB
vlan batch 10
#
interface Vlanif10
ip address 11.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
return
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-241