Huawei Quidway S9300

[HUAWEI_0.Administrator-1] display current-configuration filter snmp
snmp-agent target-host trap address udp-domain 3.0.0.1 params securityname cluster
[HUAWEI_3.Member-3] display current-configuration filter snmp
snmp-agent target-host trap address udp-domain 3.0.0.1 params securityname cluster
----End
Configuration Files
l Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 5
ntdp timer 10
ndp enable
#
interface Vlanif10
ip address 1.0.0.1 255.0.0.0
#
interface gigabitethernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface gigabitethernet1/0/2
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
cluster
mngvlanid 10
ip-pool 10.0.0.1 255.0.0.0
build HUAWEI
undo cluster-snmp-nat enable
sftp-server 2.0.0.2
logging-host 4.0.0.1
snmp-host 3.0.0.1
#
ip route-static 0.0.0.0 0.0.0.0 1.0.0.2
#
return
l Configuration file of Member-1.
#
sysname Member-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 5
ntdp timer 10
ndp enable
#
interface Vlanif10
#
interface gigabitethernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
8 HGMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8-82 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)