Temperature Graphs Screen 93
User Guide v 2.3 — September 2015 Mold Diagnostics
Heat Up Starting Temperature The temperature of the zone when the zone started the
heat up stage of the test.
Ending Temperature The temperature of the zone when the zone finished the
heat up stage of the test.
Total Increase The increase in temperature of the zone while it was being
heated.
Time Duration The time spent heating the zone.
Cool Down Starting Temperature The temperature of the zone at the start of the cool down
period.
Ending Temperature The temperature of the zone at the end of the cool down
period.
Total Decrease The decrease in temperature of the zone during the cool
down period.
Time Duration The time spent cooling the zone.
Table 8-3 Temperature Graphs Screen Button Descriptions
Button Description
Prev Displays the results of the previous zone if multiple zones
are selected.
Next Displays the results of the next zone if multiple zones are
selected.
Table 8-2 Temperature Graphs Screen Item Descriptions (Continued)
Item Description
To Next Page
Loading...
