Husky Altanium Delta3 - Ultrasync-E Setup Screen; Monitoring

UltraSync-E Setup Screen 199
User Guide v 2.3 — September 2015 UltraSync-E, If Equipped
16.4 UltraSync-E Setup Screen
Configure the UltraSync-E advanced options on the UltraSync-E Setup screen. UltraSync-E
can only be configured when the user level is sufficient and UltraSync-E is not engaged.
16.4.1 Monitoring
Peak Open Force Peak force during the last open motion.
Peak Close Force Peak force during the last close motion.
Item Description
Figure 16-3 UltraSync-E Setup Screen
Monitoring Description Minimum Maximum Default
At-Position Window The position window within which the valve stems
are reported “At Open Position” or “At Close
Position”.
0.01 mm 1.00 mm 0.10 mm