Husky Altanium Delta3 - Changing the Color of a Leader Line; Deleting a Leader Line

v 2.3 — September 2015 Altanium Delta3
150 Changing the Color of a Leader Line
11.3.3 Changing the Color of a Leader Line
To change the color of a Leader Line, do the following:
1. Make sure Mold Picture View is in Edit mode.
2. Touch the Zone Information Panel associated with the Leader Line to be changed.
3. Touch the Leader Line Color button.
4. Touch the desired color.
5. Touch the Accept button.
11.3.4 Deleting a Leader Line
To delete a Leader Line, do the following:
1. Make sure Mold Picture View is in Edit mode.
2. Touch and drag the Leader Line to be deleted onto the associated Zone Information
Panel or off the mold picture view graphic.
Figure 11-10 Mold Picture View Screen in Edit Mode
1. Change View Settings Button 2. Choose Heat Zone Button 3. Leader Line Color Button
4. Mold Picture View Graphic 5. Leader Line 6. Zone Information Panel 7. Delete Button
8. Accept Button
1
2
5
6
7
8
4
3