User Guide v 2.3 — September 2015 Making Adjustments
Zone Selection 57
Chapter 7 Making Adjustments
Adjustments can be made to the process settings for a mold setup before starting the mold,
or while the mold is running. This chapter explains how to use Altanium to monitor and
modify the system.
Altanium allows zone data to be displayed in different graphical and textual formats. These
include tabular views, images with text assigned to them and views that are divided into
groups of zones.
7.1 Zone Selection
Multiple zones can be selected from the following screens:
• Multi Group View
• Graphical View
• Text View
• Quick Set
• Art Process
• Mold Diagnostics Results
• Zone Calibration
• Zone Slot
• Staging
Zone can also be selected from the following screens:
• Neo2 View
• Mold Diagnostics
• Process Targets
There are three methods to select zones within a screen:
• Touching an individual zone element. The individual zone will become selected.
• Touching the Select All button to select all the available zone elements.
• Using the Block function. The block function works by touching and holding a zone
element for up to a second. This will highlight the zone yellow and/or place a gray
border around it. A user can then touch any other zone element within the screen and
the block of zones between the first and second selections will automatically be
selected.
To Next Page
Loading...
