Husky Altanium Delta3 - Manage Users

v 2.3 — September 2015 Altanium Delta3
48 Manage Users
5.1.1 Manage Users
HMI Administrators have the ability to create a user, change a user’s password, and delete a
user using the User Management screen.
To manage users, do the following:
1. Log in with Administrator privileges.
2. On the Home screen, touch the User Management button.
3. Choose the desired function.
4. Fill in the fields as applicable.
Thermocouple
Reading
Permission to select and clear the Display Thermocouple Reading for
Manual Zones check box on the System Setup screen.
Power Deviation Permission to select the Setup Alarm button in the Power Deviation
section on the System Setup screen.
Zone Slot
Configuration
Permissions to operate the Zone Slot Configuration fields on the System
Setup screen and the fields on the Zone Slot Configuration screen.
Zone Alarm Control Permission to configure all the parameters in the Zone Alarm Control area
of the System Setup screen.
Mold Cooling Enable
Limit
Permission to change this parameter in the Mold Cooling Enable area of
the System Setup screen.
Remote Load Setup Permission to configure all the parameters in the Remote Load Setup
dialog. This option must be purchased before the user can access this
dialog.
SPI Permission to configure the SPI parameters on the System Setup screen.
Wattage Voltage Permission to change the wattage voltage parameter on the System
Setup screen.
Supply Configuration Permission to select a parameter for the supply configuration on the
System Setup screen.
Table 5-2 Security Screen (Continued)
Item Description