User Management and Security Screens 47
User Guide v 2.3 — September 2015 Security and Administration
Monitor Zone
Settings
Permission to configure the parameters in the Monitor Zone Settings area
of the System Setup screen.
Part Counting Setup Permission to setup part counting on the System Setup screen.
Temperature
Calibration
Permission to use the parameters in the Calibration screen to calibrate
temperatures.
Autoslave Enable Permission to enable the autoslave function on the System Setup screen.
Autoslave Setup Permission to set up autoslave settings on the System Setup screen.
Soft Start Enable Permission to enable soft start on the System Setup screen.
Soft Start Setup Permission to set up soft start on the System Setup screen.
Mold Setup Auxiliary
Actions
Permission to view files (mold setups, images, txt files and PDF documents)
and operate the following buttons on the Mold Setup screen: Create
Folder, Delete, Copy, Paste, and Rename.
Mold Setup Load
Action
Permissions to load a mold setup configuration file and to create a new
mold setup configuration file on the Mold Setup screen.
Mold Setup Save
Action
Permission to save changes to the mold setup files and use the Save As
function on the Mold Setup screen.
Quick Set Advanced
Options
Permissions to make changes to the fields in the following sections on the
Quick Set screen: Frequently Used, Zone Edit, Advanced Options, and
Control Settings.
Quick Set
Temperature
Setpoints Options
Permission to change the fields in the Setpoint Limit section on the Quick
Set screen.
Quick Set Standby
and Boost Setpoints
Options
Permission to change the fields in the Manual Standby, Manual Boost,
Remote Standby and Remote Boost
sections on the Quick Set screen.
Earth Leakage Fault
Enable
Permission to select and clear the Earth Leakage Fault Enable check box
on the System Setup screen.
Earth Leakage Fault
Setup
Permission to operate the following parameters on the System Setup
screen:
• Earth Leakage Limit field
• Earth Leakage Limit Default Value field
• Earth Leakage Minimum Limit field
• Display Earth Leakage Reading checkbox
• Circuit Overload Enable checkbox
• Circuit Test Enable checkbox.
Bake Out Enable Permission to enable the bake out function on the System Setup screen.
Bake Out Setup Permission to configure the bake out function on the System Setup
screen.
Table 5-2 Security Screen (Continued)
Item Description
To Next Page
Loading...
