Husky Altanium Delta3 - Dialog Box Buttons; System Modes

v 2.3 — September 2015 Altanium Delta3
20 Dialog Box Buttons
4.1.4 Dialog Box Buttons
The following buttons are available in Altanium dialog boxes.
4.1.5 System Modes
The system mode is displayed in the status bar on each screen.
Touch the Mold Setup Info button to display the currently loaded mold
and associated mold folder. The upper word is the name of the mold folder.
The lower word is the name of the mold setup file. Touch this area to
display the Mold Setup screen.
Touch the Language Selection button to display and select the available
screen languages.
Table 4-1 Dialog Box Buttons
Screen Description
Accept
Cancel
Exit