IBM XIV User Manual

Parameters:
Name Type Description Mandatory
cluster Object name Cluster to be deleted. Y
This command deletes a cluster. All hosts contained in the cluster remain active
and are not deleted. The special type of each host is set to the cluster's special
type. The mapping of each host is set to the cluster's mapping. No I/O
interruption is caused by this command.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Warnings:
v ARE_YOU_SURE_YOU_WANT_TO_DELETE_ASSIGNED_CLUSTER
Cluster Cluster' has hosts in it. Are you sure you want to delete it?
Completion Codes:
v CLUSTER_BAD_NAME
Cluster name does not exist
Listing Clusters
Lists a specific cluster or all of them.
cluster_list [ cluster=ClusterName ]
Parameters:
Name Type Description Mandatory Default
cluster Object name Cluster to be
listed.
N All clusters.
This command lists a specific cluster or all of them. For each cluster, a special type
and a comma separated list of hosts is listed.
Id Name Default Position
name Name 1
hosts Hosts 2
type Type 3
creator Creator 4
user_group User Group 5
8 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture