IBM XIV User Manual

Parameters:
Name Description Mandatory
localipadd
ress
IP address of the IP interface for
which the ARP database should
be printed.
N
localipadd
ress6
IPv6 address of the IP interface
for which the ARP database
should be printed.
N
This command prints the ARP database of an IP interface, meaning a list of pairs
of IP addresses and their associated Ethernet MAC addresses. The IP address must
be one of the IP addresses defined for iSCSI IP interfaces, or the Management or
VPN name.
Id Name Default Position
arp_output arp Output 1
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
Completion Codes:
v NO_IP_INTERFACE_MATCHES_CRITERIA
No IP Interface matches given criteria
v MORE_THAN_ONE_IP_INTERFACE_MATCHES
More than one IP Interface matches given criteria
Testing the Traceroute to a Remote IP
Tests connectivity to a remote IP node using the ICMP trace-route mechanism.
ipinterface_run_traceroute localipaddress=IPaddress remote=remoteHost
Parameters:
Name Description Mandatory
localipadd
ress
IP address of the IP interface for
which the traceroute command
is run.
Y
remote IP address or DNS for the
traceroute test.
Y
Chapter 15. IP Configuration
321

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture