Troubleshooting: Add ipv4= or ipv6= to the command
v ENCRYPTION_KEYSERVER_IPV4_ALREADY_EXISTS
The IPv4 address or host name already exists.
Troubleshooting: Check the currently defined key servers
v ENCRYPTION_KEYSERVER_IPV6_ALREADY_EXISTS
The IPv6 address or host name already exists.
Troubleshooting: Check the currently defined key servers
v LOADED_KEYSERVER_CERTIFICATE_TOO_BIG
key server not added as the certificate is too large.
Troubleshooting: Please only use one certificate per PEM file.
Remove Keyserver
Removes a keyserver used by the system
encrypt_keyserver_delete name=Name
Parameters:
Name Type Description Mandatory
name String The name of the
defined keyserver
Y
Removes a keyserver used by the system
Example:
xcli -u -c XIV1 encrypt_keyserver_delete name=snocone
Output:
Command executed successfully.
Access Control:
User Category Permission
Storage administrator Disallowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Allowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v UNSUPPORTED_HARDWARE
Cannot utilize encryption on unsupported hardware.
Troubleshooting: Contact support to verify encryption status.
v ENCRYPTION_UNKNOWN_KEYSERVER
490 IBM XIV Storage System User Manual
To Next Page
Loading...
