IBM XIV - Aborts a Defined or Activated IBM Hyper-Scale Mobility Process

Parameters:
Name Type Description Mandatory
vol Object name The source volume. Y
This command deactivates the migration of an IBM Hyper-Scale Mobility volume.
This command is issued on the source volume.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Warnings:
v ARE_YOU_SURE_YOU_WANT_TO_DEACTIVATE_OLVM
Are you sure you want to deactivate IBM Hyper-Scale Mobility?
Completion Codes:
v VOLUME_BAD_NAME
Volume name does not exist
v REMOTE_VOLUME_IS_MASTER
Volume on remote machine is currently defined as Master
v COMMAND_NOT_SUPPORTED_FOR_OLVM_SOURCE_IN_THIS_STATE
The source is in an unsupported IBM Hyper-Scale Mobility state
v VOLUME_NOT_DEFINED_FOR_OLVM
The volume does not have IBM Hyper-Scale Mobility definitions
v COMMAND_NOT_SUPPORTED_FOR_OLVM_DESTINATION_IN_THIS_STATE
The destination is in an unsupported IBM Hyper-Scale Mobility state
v OLVM_ALREADY_INACTIVE
The IBM Hyper-Scale Mobility relation is already inactive.
Aborts a Defined or Activated IBM Hyper-Scale Mobility Process
Aborts the migration of an IBM Hyper-Scale Mobility volume.
olvm_abort < vol=VolName [ force_abort=<yes|no> | force_abort_on_destination=<yes|no> ] >
Parameters:
Name Type Description Mandatory Default
vol Object name The source
volume.
Y N/A
252 IBM XIV Storage System User Manual