IBM XIV - Resetting FC Ports

User Category Permission
Security administrator Disallowed
Read-only users Allowed
Technicians Allowed
Resetting FC Ports
Resets an FC port.
fc_port_reset fc_port=ComponentId
fc_port_reset fc_port=ComponentId [ firmware_reset=<yes|no> ]
Parameters:
Name Type Description Mandatory Default
fc_port N/A FC port identifier. Y N/A
firmware_
reset
Boolean Performs a
firmware reset
(resets all ports on
the HBA).
Nno
This command resets an FC port.
Access Control:
User Category Permission
Storage administrator Disallowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
Completion Codes:
v COMPONENT_IS_NOT_AN_FC_PORT
Component must specify an FC port
v FC_PORT_DOES_NOT_EXIST
Specified FC port does not exist
Listing Connectivity to Hosts
Lists FC and iSCSI-level connectivity to a pre-defined host.
host_connectivity_list [ host=HostName | fc_host_port=WWPN ]
[ module=ModuleNumber | fcport=ComponentId ]
Chapter 19. Fibre Channel and iSCSI Configuration and Status
397