The source is in an unsupported IBM Hyper-Scale Mobility state
v COMMAND_NOT_SUPPORTED_FOR_OLVM_DESTINATION_IN_THIS_STATE
The destination is in an unsupported IBM Hyper-Scale Mobility state
v OLVM_IS_ACTIVE
The IBM Hyper-Scale Mobility relation is active.
v FORCE_ABORT_NOT_ALLOWED
A forced IBM Hyper-Scale Mobility abort is not allowed.
Moves the IBM Hyper-Scale Mobility Source Volume to a Proxy State
Moves the IBM Hyper-Scale Mobility source volume to a Proxy state.
olvm_proxy vol=VolName
Parameters:
Name Type Description Mandatory
vol Object name The source volume. Y
This command moves the IBM Hyper-Scale Mobility source volume to a Proxy
state where the source acts as a proxy to the destination.
The source becomes a Proxy and the destination becomes the data 'owner'. Host
writes are no longer written to the source and the volume data on the source is
freed. The source volume and snapshot data are deleted.
This command is issued on the source.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Warnings:
v ARE_YOU_SURE_YOU_WANT_TO_OLVM_PROXY
Are you sure you want to move the volume Volumeto a Proxy state? Source
volume and all volume snapshots will be deleted.
Completion Codes:
v VOLUME_BAD_NAME
Volume name does not exist
v COMMAND_NOT_SUPPORTED_FOR_OLVM_SOURCE_IN_THIS_STATE
The source is in an unsupported IBM Hyper-Scale Mobility state
v COMMAND_NOT_SUPPORTED_FOR_OLVM_DESTINATION_IN_THIS_STATE
254 IBM XIV Storage System User Manual
To Next Page
Loading...
Need help?
General
