IBM XIV User Manual

Name Type Description Mandatory
new_name Object name New name of the
destination group.
Y
This command renames an event notification destination group.
This command can not be executed while there are uncleared alerting events.
Example:
destgroup_rename destgroup=alladmins new_name=itstaff
Output:
Command executed successfully.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v DESTGROUP_NAME_DOES_NOT_EXIST
Destination group name does not exist
v DESTGROUP_NAME_ALREADY_EXISTS
Destination group name already exists
v CANNOT_CHANGE_EVENT_CONF_WITH_ALERTING_EVENTS
Cannot change event configuration while there are alerting events
Troubleshooting: Clear all alerting events before changing event configuration
v DESTGROUP_NAME_IS_DEST_NAME
Destination group name already exists as a destination name
Clearing Alerting Events
Clears alerting events.
event_clear event_id=EventId [ all_preceding=<yes|no> ] [ internal=<yes|no|all> ]
Parameters:
Name Type Description Mandatory Default
event_id Positive integer ID number of the
event to clear.
Y N/A
276 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture