IBM XIV User Manual

User Category Permission
Read-only users Disallowed
Technicians Allowed
Completion Codes:
v NO_FIRMWARE_UPGRADE_IN_PROGRESS
No firmware upgrade is in progress
Status of a Firmware Upgrade Process
Displays overall status of the ongoing or most recently completed firmware
upgrade process
component_firmware_upgrade_status
Shows overall status of an ongoing, or the most recent completed firmware
upgrade process since the last reboot. The following fields are displayed:
v last_process_start: Timestamp of the start of the most recent firmware upgrade
process (completed or ongoing).
v last_process_end: Timestamp of the end of the most recent completed firmware
upgrade process. Empty if a process is in progress.
v in_progress: Whether a firmware upgrade process is in progress. If 'no' the
current information (if any) pertains to the most recent completed firmware
upgrade process. If 'yes' a firmware upgrade process is ongoing; it may already
be aborting, but it has not terminated yet).
v abort: If 'yes, the current or most recent firmware upgrade process has received
an abort request (either internally or by the user). In combination with
in_progress=yes, the logical state can be thought of as "aborting"; in combination
with in_progress=no, the logical state can be thought of as "aborted".
v abort_reason: If abort=yes, quotes the reason for the abort (e.g., "User abort").
v firmware_type: The type of firmware upgraded by the ongoing or most recent
firmware upgrade process (see [#component_firmware_upgrade]).
v upgrade_type: The upgrade type of the ongoing or most recent firmware
upgrade process (see [#component_firmware_upgrade]).
v scope: The scope of the ongoing or most recent firmware upgrade process (see
[#component_firmware_upgrade]).
v label: The label of the ongoing or most recent firmware upgrade process (see
[#component_firmware_upgrade]). Usually, the value is "PREFERRED",
indicating that no label option was given to the component_firmware_upgrade
command.
v current_timeout: Current effective timeout (not counting down).
v current_cooldown: Current effective cooldown (not counting down).
v num_succeeded: Number of components successfully upgraded.
v num_failed: Number of components which failed upgrade.
v num_noops: Number of components which did not perform an upgrade
operation (usually because they were already at the correct firmware level).
Id Name Default Position
name Name 1
418 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture