IBM XIV User Manual

Completion Codes:
v NO_SUPPORT_CENTERS_ARE_DEFINED
No support centers are defined
v IDLE_TIMEOUT_MUST_BE_LOWER_THAN_TIMEOUT
The idle timeout, if specified, must be lower than the regular timeout
v MODULE_HAS_NO_SUPPORT_CENTER_PORT
The specified module does not have a port from which Support Center can
connect
v NO_MODULE_WITH_SUPPORT_CENTER_PORT
No module has a port from which Support Center can connect
v REMOTE_SUPPORT_CLIENT_ALREADY_RUNNING
The Remote Support Client is already running
Defining a Support Center
This command defines a support center.
support_center_define support_center=SupportCenterName address=Address
[ port=port ] [ priority=priority ]
Parameters:
Name Type Description Mandatory Default
support_
center
Object name The name of the
support center
server
Y N/A
address N/A The IP address of
the support center
server
Y N/A
port Positive integer The TCP port to
connect to on the
support center
N22
priority N/A The priority of the
support center
(support centers
with a higher
priority will be
connected first)
N0
This command defines a support center.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
332 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture