IBM XIV User Manual

Monitoring Rebuild or Redistribution Processes
Monitors the status of a rebuild or redistribute process.
monitor_redist
This command outputs the current rebuild or redistribution process. This
command may show that no such process exists.
If such a process exists, the following information is shown:
v Type (adding new capacity, replacing failed component, phase-out, rebuild after
failure)
v Initial capacity to copy
v Time started
v Capacity remaining to copy
v Time elapsed
v Percent completed
v Estimated time to completion
Id Name Default Position
type Type 1
initial_
capacity_to_
copy
Initial Capacity to Copy (GB) 2
capacity_
remaining_to_
copy
Capacity Remaining to Copy
(GB)
3
percent_done %done 4
time_started Time Started 5
estimated_
time_to_finish
Estimated Time to Finish 6
time_elapsed Time Elapsed 7
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Allowed
Security administrator Disallowed
Read-only users Allowed
Technicians Allowed
434 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture