IBM XIV User Manual

Chapter 9. System Management
The following sections describe the XIV Command Line Interface (XCLI) for
system management.
The sections are listed as follows:
v cod_list(Displays current consumed capacity of the system.)
v config_get(Shows the values of configuration parameters.)
v config_set(Sets configuration parameters.)
v dns_test(Tests the DNS (Domain Naming Service).)
v help(Prints system help.)
v maintenance_urgency_list(Prints the current maintenance urgency of the
system.)
v patch_script_add(Adds a patch script that will be run on system's module(s).)
v patch_script_delete(Deletes a patch script.)
v patch_script_list(Lists patch_scripts.)
v patch_script_update(Updates a patch script that will be run on system's
module(s).)
v patch_script_get_log(Gets a patch script log.)
v patch_script_activate(Trigger patch script execution on one or all modules.)
v patch_script_status(Get patch script execution information)
v shutdown(Shuts down the system.)
v state_change(Changes the operational state of a system.)
v state_list(Shows the current operational state of the system.)
v local_storage_show(shows free space left in local storage.)
v system_power_management_get(Print the system power management data.)
v system_capacity_list(Lists the system's capacities (both hard and soft).)
v time_list(Shows the current system time.)
v time_set(Sets the system's time in YYYY-MM-DD.HH:MM:SS format.)
v timezone_list(Lists all optional time zones.)
v timezone_set(Sets the time zone of the system.)
v upgrade_abort_ongoing(Aborts a system upgrade process.)
v upgrade_download(Initiates the downloading of a new software version.)
v upgrade_download_cancel(Cancels an upgrade download process.)
v upgrade_force_on(Forces the system to continue the upgrade process.)
v upgrade_get_status(Displays status of upgrade process.)
v upgrade_system(Upgrades the software version of the system.)
v upgrade_validate_prerequisites(Validates the ability to upgrade to a specified
system version)
v version_get(Prints the current version of the system.)
v vpd_config_get(Shows the values of VPD parameters.)
v vpd_config_set(Sets the values of VPD parameters.)
v mm_config_get(Shows the values of Maintenance Module parameters.)
v mib_get(Displays the system's MIB file.)
135

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture