IBM XIV User Manual

User Category Permission
Storage integration administrator Allowed
Application administrator Allowed
Security administrator Disallowed
Read-only users Allowed
Technicians Disallowed
Removing a Port from a Host
Removes a port from a host.
host_remove_port host=HostName < fcaddress=wwpn | iscsi_name=iSCSIName >
Parameters:
Name Type Description Mandatory
host Object name The host name. Y
fcaddress N/A FC address of the port
to be removed.
N
iscsi_name iSCSI initiator name iSCSI initiator name of
the port to be removed.
N
This command removes a port from a host.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v HOST_BAD_NAME
Host name does not exist
v PORT_DOES_NOT_BELONG_TO_HOST
Port ID belongs to another host
v HOST_PORT_DOES_NOT_EXIST
Port ID is not defined
v ISCSI_HOST_ILLEGAL_PORT_NAME
Port name for iSCSI Host is illegal
Troubleshooting: Port names for iSCSI Hosts must contain only printable
characters.
v OLVM_LINK_IS_NOT_UP
IBM Hyper-Scale Mobility link is not up. The mapping list cannot be updated.
v TARGET_PORT_BAD_ADDRESS
16 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture