IBM XIV User Manual

Completion Codes:
v MAX_SUPPORT_CENTERS_DEFINED
Maximum number of support centers is already defined.
Deleting a Support Center
This command deletes a support center.
support_center_delete support_center=SupportCenterName
Parameters:
Name Type Description Mandatory
support_
center
Object name The name of the
support center to delete.
Y
This command deletes a support center. Sessions that belong to this support center
are disconnected, even if they are open at the time of deletion.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
Warnings:
v ARE_YOU_SURE_TO_DELETE_THE_SUPPORT_CENTER
Are you sure you want to delete Support Center?.
Completion Codes:
v SUPPORT_CENTER_NOT_DEFINED
Support Center is not defined.
v CANNOT_DELETE_WHILE_SUPPORT_CENTER_IS_RUNNING
Support Center is running. Disconnect before deleting.
Disconnecting from a Support Center
This command disconnects the IBM XIV Storage System from a support center.
support_center_disconnect
This command disconnects the IBM XIV Storage System from a support center.
Chapter 15. IP Configuration 333

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture