Local volume does not have remote mirroring definitions
v CONS_GROUP_BAD_NAME
Consistency Group name does not exist.
v CONS_GROUP_NO_MIRROR
Local Consistency Group does not have remote mirroring definitions
v LOCAL_PEER_IS_NOT_MASTER
Local peer is not the master
v MIRROR_DESIGNATION_NOT_SUPPORTED_BY_TARGET
Mirror role designation is not supported by the Mirror's Target.
v MIRROR_IS_NON_OPERATIONAL
Mirror is non-operational
v VOLUME_BELONGS_TO_MIRRORED_CONS_GROUP
Volume mirror is part of Consistency Group mirror.
Changing a Mirroring Schedule for Remote Slave Peers
Changes the replication schedule of a remote Slave peer.
mirror_change_remote_schedule < vol=VolName |
cg=cgName > remote_schedule=Schedule
Parameters:
Name Type Description Mandatory
vol Object name Local master volume
name
N
cg Object name Local master CG name N
remote_
schedule
Object name A reference to a remote
schedule that should be
set for the remote slave
peer (which
corresponds with the
Master specified in the
command)
Y
This command changes the replication schedule of an asynchronous coupling in
order to make it effective after the role of a specified remote Slave peer is changed
to Master.
Prerequisites:
v The coupling must be ASYNC_INTERVAL.
Following the command execution:
v The system displays a warning
v If the command is approved, it is executed
v An event is generated
v New sync jobs are generated according to the updated schedule
v Existing sync jobs are not affected (i.e. they run according to the previous
schedule)
Requirements for a successful command completion:
208 IBM XIV Storage System User Manual
To Next Page
Loading...
