IBM XIV User Manual

Specified MTU value is too large
v ILLEGAL_IPADDRESS
Illegal IP address was entered
v DUPLICATE_IPADDRESSES
Duplicate IP addresses were specified
v ILLEGAL_GATEWAY_IPADDRESS
Illegal IP address was specified for default gateway
v ILLEGAL_IPV6ADDRESS
Illegal IPv6 address was entered
v DUPLICATE_IPV6ADDRESSES
Duplicate IPv6 addresses were specified
v ILLEGAL_GATEWAY_IPV6_ADDRESS
Illegal IPv6 address was specified for default gateway
v IPV6ADDRESS_AND_GATEWAY_ARE_NOT_ON_SAME_SUBNET
IPv6 address specified for the default gateway is not in the subnet of the IP
Interface
v IPV6_ADDRESS_ALREADY_USED_IN_ANOTHER_INTERFACE
IPv6 address is already assigned to another interface
v IPINTERFACE_MANAGEMENT_MISSING_IPV6S
Number of IPv6 addresses specified is less than the number of management
modules
v IPINTERFACE_MANAGEMENT_TOO_MANY_IPV6S
Number of IPv6 addresses specified is larger than the number of management
modules
v IPINTERFACE_MANAGEMENT_DIFFERENT_IPV6_SUBNET
IPv6 addresses management modules must all be in the same subnet
Defines a New IPSec Connection
Adds a new IPSec connection
ipsec_connection_add ipsec_connection=ConnectionName left=IPInterfaceName
[ right_ip=RightIpAddress ] < passkey=PassKey | certificate=PemCertificate >
Parameters:
Name Type Description Mandatory Default
ipsec_
connection
N/A Name of the IPSec
connection to be
added.
Y N/A
left Object name Name of the IP
interface to be
used as left side:
management or VPN.
Y N/A
right_ip N/A IP address of the
right side.
N Any
passkey N/A Secret password. N N/A
Chapter 15. IP Configuration
325

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture