IBM XIV User Manual

Command completed successfully
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v CANNOT_CHANGE_EVENT_CONF_WITH_ALERTING_EVENTS
Cannot change event configuration while there are alerting events
Troubleshooting: Clear all alerting events before changing event configuration
v EVENT_RULE_NAME_ALREADY_EXISTS
Event rule name already exists
v EVENT_RULE_NAME_DOES_NOT_EXIST
Event rule name does not exist
Updating an Event Notification Rule
Updates an event notification rule.
rule_update rule=RuleName
[ min_severity=<INFORMATIONAL|WARNING|MINOR|MAJOR|CRITICAL|NONE> ]
[ codes=Codes ] [ except_codes=EventCodes ]
[ escalation_only=<yes|no> ]
[ dests=dest1,dest2,...
] [ snooze_time=SnoozeTime ]
[ escalation_time=EscalationTime ] [ escalation_rule=EscalationRule ]
Parameters:
Name Type Description Mandatory Default
rule Object name Name of the rule. Y N/A
min_
severity
Enumeration Minimum event
severity for rule
filtering.
N Leave unchanged.
codes N/A Filter only events
with this code.
N Leave unchanged.
except_
codes
N/A Filter only events
with other codes.
N Leave unchanged.
escalation
_only
Boolean Specifies that this
rule can only be
used for escalation.
Nno
Chapter 14. Event Handling
293

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture