IBM XIV - Resetting a Failed Command Service

User Category Permission
Read-only users Allowed
Technicians Allowed
Resetting a Failed Command Service.
Resets a specified command service on a specified module.
reset_command_service service=ServiceName module=ModuleNumber
Parameters:
Name Type Description Mandatory
module N/A Target module on which
a failed service will be
reset. Format:
1:Module:1.
Y
service String Name of the service
that will be reset.
Y
Resets a Specified Command Service on a Specified Module.
Example:
xcli -u -c XIV1 reset_command_service service=sm_port1 module=1:Module:1
Output:
Command completed successfully
Access Control:
User Category Permission
Storage administrator Disallowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
Completion Codes:
v COMMAND_SERVICE_DOES_NOT_EXIST
Specified service is not a known command service
v ONLY_FAILED_SERVICES_CAN_BE_RESTARTED
Only failed services can be restarted
v CONTAINING_COMPONENT_IN_WRONG_STATUS
Operation not allowed in current status of containing component.
Chapter 20. Hardware Maintenance 447