The destination is in an unsupported IBM Hyper-Scale Mobility state
v VOLUME_NOT_DEFINED_FOR_OLVM
The volume does not have IBM Hyper-Scale Mobility definitions
v OLVM_LINK_IS_NOT_UP
IBM Hyper-Scale Mobility link is not up. The mapping list cannot be updated.
v HOST_BAD_NAME
Host name does not exist
v ISCSI_HOST_ILLEGAL_PORT_NAME
Port name for iSCSI Host is illegal
Troubleshooting: Port names for iSCSI Hosts must contain only printable
characters.
v MAX_PORTS_REACHED
Maximum number of ports already defined in the system
v HOST_PORT_EXISTS
Host with this port ID already defined
v REMOTE_MAX_VIRTUAL_HOSTS_REACHED
Maximum number of remote virtual hosts already defined
Deletes an IBM Hyper-Scale Mobility Relationship
Deletes an IBM Hyper-Scale Mobility relationship.
olvm_delete vol=VolName [ force_delete=<yes|no> ]
Parameters:
Name Type Description Mandatory Default
vol Object name IBM Hyper-Scale
Mobility volume.
Y N/A
force_
delete
Boolean A Boolean that
determines
whether to delete
an IBM
Hyper-Scale
Mobility
relationship on the
destination.
NNo
This command deletes an IBM Hyper-Scale Mobility relationship. IBM Hyper-Scale
Mobility attributes are deleted as well. This command is issued on the source.
In case there is no communication to the destination, the command can force delete
the IBM Hyper-Scale Mobility relationship.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Chapter 13. IBM Hyper-Scale Mobility
255
To Next Page
Loading...
Need help?
General
