IBM XIV User Manual

Command completed successfully
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v TARGET_BAD_NAME
Target name does not exist
v COMMAND_NOT_ALLOWED_ON_MANAGEMENT_INTERFACE
Operation is not allowed on Management IP Interface
v CONNECTIVITY_NOT_DEFINED
Remote port is not connected through this local port
v COMPONENT_IS_NOT_AN_FC_PORT
Component must specify an FC port
v TARGET_PORT_BAD_ADDRESS
Remote port address is illegal or does not belong to the remote target
v BAD_LOCAL_IP_PORT
An ID of a local IP port must be specified
v IPINTERFACE_DOES_NOT_EXIST
IP Interface name does not exist
v TARGET_HAS_OLVM_RELATIONSHIP
Target has an IBM Hyper-Scale Mobility relationship - cannot be deactivate or
deleted
Defining Connectivity to a Remote Target
Defines connectivity between a port on the local storage system and a port on a
remote target.
target_connectivity_define target=TargetName
< ipaddress=IPaddress local_ipinterface=IPInterface > |
< fcaddress=wwpn local_port=PortID >
Parameters:
Name Type Description Mandatory
target Object name Remote target of the
connectivity definition.
Y
ipaddress N/A IP address of the port
on the remote target
(iSCSI targets only).
N
180 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture