IBM XIV User Manual

This command runs a route trace to the specified remote host through the specified
IP interface. The IP address must be one of the IP addresses defined for iSCSI IP
interfaces or the Management or VPN name.
Id Name Default Position
traceroute_
output
traceroute Output 1
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
Completion Codes:
v NO_IP_INTERFACE_MATCHES_CRITERIA
No IP Interface matches given criteria
v MORE_THAN_ONE_IP_INTERFACE_MATCHES
More than one IP Interface matches given criteria
Testing the Traceroute to a Remote IP
Tests connectivity to a remote IP node using the ICMP trace-route mechanism.
ipinterface_run_traceroute6 localipaddress6=IPv6address remote6=remoteHost
Parameters:
Name Description Mandatory
localipadd
ress6
IPv6 address of the IP interface
for which the traceroute6
command is run.
Y
remote6 IPv6 address or DNS for the
traceroute test.
Y
This command runs a route trace to the specified remote host through the specified
IP interface. The IP address must be one of the IP addresses defined for iSCSI IP
interfaces or the Management or VPN name.
Id Name Default Position
traceroute_
output
traceroute Output 1
322 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture