IBM XIV User Manual

v target_portset_port_deactivate (Portsets are not in use any more. Use
target_port_deactivate.)
v target_portset_list (Port Sets are no longer in use in this version. Ports are
associated directly with targets.)
Setting a Threshold for Link Disruption Duration that Triggers an Event
Setting a threshold for link disruption that lasts more than a specified duration
target_change_connection_threshold target=TargetName [ duration=duration ]
Parameters:
Name Type Description Mandatory Default
duration Integer Duration for link
down that will
trigger an event, in
seconds. Valid
value is between 1
and 1000000
seconds.
N30
target Object name The name of the
XIV system the
threshold is set to.
Y N/A
Sets the duration for a link disruption that will trigger an event.
Example:
target_change_connection_threshold target="XIV MN00043" duration=25
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v TARGET_BAD_NAME
Target name does not exist
v TARGET_INVALID_CONNECTION_DURATION_THRESHOLD
Target connection duration threshold should be in [1,1000000] range
176 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture