IBM XIV User Manual

Completion Codes:
v IB_PORT_NOT_PRESENT
Specified port is not defined in the system.
v IB_PORT_EXISTS
Specified IB port is already defined in the system.
v IB_PORT_NOT_VALID
Illegal number for IB port was given.
v IB_PORT_NOT_LICENSED
Specified IB port is not licensed in this switch.
v IB_PORT_MOVE_ONLY_IN_SWITCHT
IB port should move only in the same switch it is connected to.
v OPERATION_NOT_ALLOWED_ON_NON_REDUNDANT_SYSTEM
Service cannot be restarted while system is not redundant
Troubleshooting: Please wait until rebuild process is over
v IB_MODULE_PORTS_NOT_REDUNDANT
Specified port cannot be moved while module is not redundant
v IB_SWITCH_PORTS_NOT_REDUNDANT
Specified port cannot be moved while switch interconnect port is not redundant
Lists Configured IB Ports
Lists configured IB ports.
ib_port_list [ ib_port=ComponentId ]
Parameters:
Name Description Mandatory Default
ib_port IB port to list. N All IB ports
Lists a table of configured IB ports.
Example:
xcli -u -c XIV1 ib_port_list
v Port
v Connected Component
v Status
v Allow Any GUID
v GUID
v State
v Currently Functioning
v Requires Service
v Service Reason
v SM Port in Test
v SM Port is Master
v SM Port Target State
348 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture