IBM XIV - Listing Infiniband HCA Adapters in the System

Id Name Default Position
component_id Component ID 1
state State 2
result Result 3
Example:
xcli -u -c XIV1 component_firmware_upgrade_progress
Output:
Component ID State Result
-------------- ------------- ---------
1:Disk:3:1 Done Success
1:Disk:3:2 Done Success
1:Disk:3:3 Done Success
1:Disk:3:4 Done Success
1:Disk:3:5 Done Success
1:Disk:3:6 Done Success
1:Disk:3:7 On cooldown Success
1:Disk:3:8 To do
1:Disk:3:9 To do
1:Disk:3:10 To do
1:Disk:3:11 To do
1:Disk:3:12 To do
Access Control:
User Category Permission
Storage administrator Disallowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
Listing InfiniBand HCA Adapters in the System
Lists the InfiniBand HCA adapters in the XIV system.
hca_list [ module=ModuleNumber | hca=ComponentId ]
Parameters:
Name Description Mandatory Default
module Limits the listing to a
specific module.
N All InfiniBand HCA
adapters in all modules.
hca Lists only a specific
HCA.
N A specific InfiniBand
HCA.
This command lists the InfiniBand HCA adapters in the XIV system.
Example:
420 IBM XIV Storage System User Manual