IBM XIV User Manual

Parameters:
Name Type Description Mandatory Default
ipsec_
connection
Object name IPSec connection
to be listed.
N All IPsec
connections
Lists specific IPSec connection or all of them.
The following information is listed:
v Name
v Type (PSK, RSA, RSA/PSK)
v Interface
v Right ip
Id Name Default Position
name IPSec Connection 1
type Type 2
left Left Interface 3
right_ip Right Address 4
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Allowed
Security administrator Disallowed
Read-only users Allowed
Technicians Allowed
Listing IPSec Tunnels
Lists the IPSec tunnels.
ipsec_list_tunnels [ ipsec_connection=ConnectionName ] [ left=IPInterfaceName ]
[ left_ip=InterfaceIpAddress ] [ right_ip=RightIpAddress ] [ module=ComponentId ]
Parameters:
Name Type Description Mandatory Default
ipsec_
connection
Object name IPSec tunnels of
this IPSec
connection to be
listed.
N IPSec tunnels of all
IPsec connections
left Object name IPSec tunnels from
this interface to be
listed.
N IPsec tunnels from
any interface
left_ip N/A IPSec tunnels from
this left IP to be
listed.
N IPsec tunnels from
any left IP
Chapter 15. IP Configuration
329

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture