IBM XIV User Manual

Listing Remote Targets
Lists a specified remote target definition, or all the target definitions.
target_list [ target=TargetName ]
Parameters:
Name Type Description Mandatory Default
target Object name Target name that is
listed.
N All targets
This command lists a specified remote target definition, or all the target definitions.
The following is listed for each target: port groups, ports, active/inactive status for
each port, and the following mirroring-related values - max initialization rate, max
resync rate, and max sync job rate.
Id Name Default Position
name Name 1
scsi_type SCSI Type 2
connected Connected 3
xiv_target XIV Target N/A
iscsi_name iSCSI Name N/A
system_id System ID N/A
num_ports Number of Ports N/A
creator Creator N/A
max_
initialization
_rate
Max Initialization Rate 4
max_resync_
rate
Max Resync Rate 5
max_syncjob_
rate
Max Syncjob Rate 6
connectivity_
lost_event_
threshold
Connection Threshold N/A
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Allowed
Security administrator Disallowed
Read-only users Allowed
Technicians Disallowed
Chapter 10. Remote Target Connectivity
187

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture