Parameters:
Name Type Description Mandatory
vol Object name Volume name on the
local system.
N
cg Object name CG name on the local
system
N
schedule Object name A reference to a
mirroring schedule
Y
This command changes the replication schedule for a peer on the local system. The
new scheduling will become effective only if the peer is set as Master.
Prerequisites:
v The coupling must be ASYNC_INTERVAL.
v The Schedule’s interval has to be shorter than the corresponding mirror's RPO.
The command fails under the following conditions:
v The specified target does not exist
v The specified target is non-mirrored
v The specified target is a volume that belongs to a mirrored Consistency Group
v The specified target synchronization type is not ASYNC_INTERVAL
Setting a scheduling reference:
v The system displays the following warning: Are you sure to change schedule.
v An event is generated
v New sync jobs will be generated according to updated schedule. A running sync
job is unaffected.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v VOLUME_BAD_NAME
Volume name does not exist
v CONS_GROUP_BAD_NAME
Consistency Group name does not exist.
v VOLUME_NO_MIRROR
Local volume does not have remote mirroring definitions
v CONS_GROUP_NO_MIRROR
Local Consistency Group does not have remote mirroring definitions
v SCHEDULE_DOES_NOT_EXIST
Specified Schedule does not exist
Chapter 11. Remote Mirroring 213
To Next Page
Loading...
