data to the components (redistribution) begins. Components must be in Ready or
Phasing Out states. There is no phase-in for power supplies, SFPs or batteries.
Access Control:
User Category Permission
Storage administrator Disallowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Allowed
Warnings:
v WARNING_COMPONENT_IS_PHASING_OUT
Component is being phased out. Are you sure you want to phase it in?
Completion Codes:
v PHASEIN_NOT_SUPPORTED_FOR_THIS_COMPONENT_TYPE
This component type cannot be phased-in
v PHASEIN_NOT_ALLOWED_IN_CURRENT_STATUS
Component cannot be phased-in in its current status
v PHASEIN_NOT_ALLOWED_DURING_SDL_RECOVERY
Component cannot be phased-in during an SDL recovery
Troubleshooting: Wait for the SDL recovery to complete
v COMPONENT_DOES_NOT_EXIST
Component does not exist
v USE_SERVICE_PHASEIN_COMMAND
Command component_phasein does not support services. Please use
service_phasein.
v CONTAINING_COMPONENT_IN_WRONG_STATUS
Operation not allowed in current status of containing component.
v SUBCOMPONENT_IN_WRONG_STATUS
Operation not allowed in current status of a subcomponent.
v CONTROLLING_SERVICES_NOT_ALLOWED_FOR_USER_CATEGORY
Controlling services not allowed for user category
v SERVICE_CANNOT_BE_PHASED_IN
Service cannot be phased in because its interface services cannot be activated.
Troubleshooting: Check system requirements for activating interface services.
v FIRMWARE_UPGRADE_IN_PROGRESS
Firmware upgrade in progress
Troubleshooting: Contact support
v CANNOT_WRITE_TO_KEY_REPOSITORY
Failed writing keys to the key repository.
Troubleshooting: Contact support.
v NO_LIVE_KEYSERVER_GATEWAY_NODE
There is no live key server gateway node on the system.
410 IBM XIV Storage System User Manual
To Next Page
Loading...
