IBM XIV User Manual

Name Type Description Mandatory Default
from N/A The source address
that XIV support
access limited. It
may be either IPv4
or IPv6 address, or
any,ortechnician
denoting Laptop
port.
Y N/A
comment String Reason why XIV
support access is
enabled.
Y N/A
Enables XIV support access for a specific period of time limiting access from the
specific address.
Example:
xcli -u -c XIV1 xiv_support_enable finish=2012-2-3.16:30 from=1.2.3.4
comment="Some reason"
Output:
Command executed successfully.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Warnings:
v ARE_YOU_SURE_YOU_WANT_TO_ENABLE_XIV_SUPPORT
Are you sure you want to enable xiv support?
Completion Codes:
v XIV_SUPPORT_WORK_INVALID_TIMEOUT
Timeout must be positive and define time creater then the current time.
v XIV_SUPPORT_WORK_INVALID_FINISH
Finish must be greater then start and the current time.
v XIV_SUPPORT_WORK_INVALID_FROM
From must be valid IPv4 or IPv6 address.
454 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture