Output:
Command executed successfully.
Access Control:
User Category Permission
Storage administrator Disallowed
Storage integration administrator Disallowed
Application administrator Disallowed
Security administrator Allowed
Read-only users Disallowed
Technicians Disallowed
Warnings:
v ARE_YOU_SURE_YOU_WANT_TO_DISABLE_ENCRYPTION
Are you sure you want to disable encryption on this system?
Troubleshooting: A yes option is required for this command
Completion Codes:
v UNSUPPORTED_HARDWARE
Cannot utilize encryption on unsupported hardware.
Troubleshooting: Contact support to verify encryption status.
v ENCRYPT_NOT_ENABLED
Encryption is not enabled.
Troubleshooting: Check that encryption is enabled and retry the command.
v VOLUME(S)_DEFINED
There are volumes defined, cannot disable encryption.
Troubleshooting: All volumes must be removed before encryption is disabled.
v CANNOT_UNMOUNT_STATISTIC_VOLUME
Failed to unmount statistics volume for disabling encryption.
Troubleshooting: Please contact support.
v CANNOT_CRYPTO_ERASE_DISKS
Cannot crypto-erase disks.
Troubleshooting: Contact support.
v CANNOT_WRITE_TO_KEY_REPOSITORY
Failed writing keys to the key repository.
Troubleshooting: Contact support.
v NO_LIVE_KEYSERVER_GATEWAY_NODE
There is no live key server gateway node on the system.
Troubleshooting: Please restart the key server gateway node and retry.
v NO_MASTER_KEYSERVER_DEFINED
There is no master key server defined on the system.
Troubleshooting: Please define a master key server by invoking encrypt_key
server_update and retry.
v KEYSERVER_COMMUNICATION_GENERIC_ERROR
486 IBM XIV Storage System User Manual
To Next Page
Loading...
