IBM XIV User Manual

Description The PDB module module is working now.
Troubleshooting N/A
SES_BMC_ERROR_SIGNAL
Severity warning
Description The BMC on module module signals an error.
Troubleshooting Please contact support.
SES_BMC_IS_OK_NOW
Severity informational
Description The BMC on module module is OK now.
Troubleshooting N/A
SES_ALARM_LED_IS_SIGNALING
Severity warning
Description On module alarm of type 'Component type (LED
type)' is signaling.
Troubleshooting Please contact support.
SES_ALARM_LED_NO_LONGER_SIGNALING
Severity informational
Description On module alarm of type 'Component type (LED
type)' is no longer signaling.
Troubleshooting Please contact support.
SES_EXPANDER_RESET
Severity warning
Description The SES expander on module has been reset. Reset
type was: Reset type.
Troubleshooting Please contact support.
SES_EXPANDER_RESET_COUNTER_CLEAR
Severity informational
Description The SES expander reset counter on module has
reached it's maxiaml value and will be cleared.
Troubleshooting N/A
IB_HCA_OVERHEATING
Severity major
Description Adapter Module Component ID is overheating and
reached a temperature of IB HCA Temperature.
Troubleshooting Please contact support.
Chapter 24. Events
589

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture