IBM XIV User Manual

IPMI_USER_SETUP_FAILED
Severity major
Description Error setting up IPMI USER for module Module.
Troubleshooting Contact support.
IPMI_LAN_SETUP_FAILED
Severity major
Description Error setting up IPMI LAN channel Channel for
module Module.
Troubleshooting Contact support.
IPMI_SEL_ENTRY_CRIT
Severity critical
Description Entry Name SEL entry on component ID Date Time
with data d0=d0 d1=d1 d2=d2 dir=direction.
Troubleshooting Please contact support.
IPMI_SEL_ENTRY_INFO
Severity informational
Description Entry Name SEL entry on component ID Date Time
with data d0=d0 d1=d1 d2=d2 dir=direction.
Troubleshooting Please contact support.
IPMI_SEL_LOG_ENTRY
Severity variable
Description IPMI SEL log entry 'Entry Name' found on
component ID at 'Date Time'. Raw event data is 'd0
d1 d2', direction is direction.
Troubleshooting Please contact support.
IPMI_SEL_ENTRY_NEW
Severity major
Description Entry Name SEL entry on component ID Date Time
SType=sensor_type SNum=sensor_number with data
d0=d0 d1=d1 d2=d2 dir=direction.
Troubleshooting Please contact support.
FC_PORT_HAS_UNEXPECTED_FIRMWARE
Severity minor
Description fc port Component firmware version is old and
should be upgraded: active firmware instead of
correct firmware.
Troubleshooting Please contact support.
Chapter 24. Events
597

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture