IBM XIV User Manual

X
XCLI IBM XIV command-line interface (XCLI)
command set. See command line interface.
XCLI client
The system on which the XCLI command
is entered.
XCLI identification parameters
Parameters that identify the user issuing
the command and the XIV system (if any)
on which the command is to run. XCLI
identification parameters can be specified:
v By entering them at the beginning of an
interactive mode session
v In a configuration file
v When running a command in basic
mode
v When running a list of commands as a
batch
XCLI system command
An XCLI command that is sent to the XIV
system for processing.
XCLI utility command
An XCLI command that is issued on the
XCLI client. An XCLI utility command is
not sent to an XIV system for processing.
XCLI utility commands are used for
setting up configurations on the XCLI
client and for queries (for example, of
software version) that can be processed
on the client.
XDRP The disaster recovery program for the
XIV – The remote mirror feature of the
XIV.
XIV mapping
An association of data on the LDAP
server (a specific LDAP attribute) and
data on the XIV. This is required to
determine which access rights to grant to
an authenticated LDAP user.
644 IBM XIV Storage System User Manual

IBM XIV Specifications

General

Power Supply	Redundant power supplies
Drive Type	SATA
Redundancy	Fully redundant components
Connectivity	Fibre Channel, iSCSI
Form Factor	Rack-mounted
Cache	Distributed cache across modules
Data Protection	Snapshots, remote mirroring
Performance	High throughput and low latency
Scalability	Modular, scale-out architecture
Cooling	Redundant cooling
Architecture	Grid-based, distributed architecture