Sensor Name
3
Sensor # Sensor Type Event /
Reading Type
Event Offset
Triggers
Contrib. To
System Status
Assert /
De-assert
Readable
Value /
Offsets
Event
Data
Rearm Stand-
by
Non-red: insuff res Fatal
Note 1: Not supported except for ESB2 embedded NICs
Note 2: For system with redundant cooling capability, the contribution to system status is determined by the fan redundancy sensor.
Note 3: Sensor name strings in SDR may vary from the names in this table.
Note 4: Sensor only present on systems that have applicable redundancy (for instance, fan or power supply).
Note 5: The BMC does not provide a direct contribution to overall system status due to the DIMM sensors. BIOS determines contribution depending on failure
scenario and uses the Set Fault Indication command to provide this information to the BMC. See Table 6, System Status LED Indicator States.
Note 6: Error logging for this sensor is due to port-mortem memory error scan after an SMI Timeout has occurred. Contribution to system status is determined by
the SMI Timeout sensor.
To Next Page
Loading...
Need help?
General
