Intel S7000FC4UR Technical Product Specification

Intel® Server System S7000FC4UR TPS BIOS User Interface
Revision 1.0
193
Setup Item Options Help Text Comments
Save as User Default
Values
Save current BIOS Setup
Utility values as custom user
default values. If needed, the
user default values can be
restored via the Load User
Default Values option below.
Note: Clearing CMOS or
NVRAM will cause the user
default values to be reset to
the factory default values.
User is prompted for
confirmation.
Load User Default
Values
Load user default values. User is prompted for
confirmation.
15.3 Loading BIOS Defaults
Different mechanisms exist for restoring the system configuration to default values. The BIOS
loads the default system configuration values during the next POST after the request is
received.
A user can restore the BIOS factory default configuration as follows::
 The BIOS Setup Utility <F9> hotkey or Exit menu Load Default Values option
 The main board NVRAM Clear jumper
- Power down the system, but do not remove AC power.
- Configure the NVRAM Clear jumper to enabled/clear CMOS, connecting pins 2 and
3.
- Configure the NVRAM Clear jumper to default/normal mode, connecting pins 1 and
2.
- Power on the system.
Note: The server system does not support any other mechanisms to clear NVRAM.

Intel S7000FC4UR Specifications

General

Brand	Intel
Model	S7000FC4UR
Category	Server
Language	English